DIY: dip dye

by Deborah

diydye2
diydye
dipdye1
dipdye3
dash

A bit ago I mentioned how I’m loving the dip dyed look. Well I have been
playing around with fabric dye and thought I would share with you.
you’ll need:
Rubber gloves
Bucket
Fabric dye
Salt
Scissors
Hanger
Pillowcase
String/elastic band (for tie dye)
Firstly, add to the bucket water, salt and dye following the instructions on the packet for the correct measurements mixing this all together.
Soak the pillow case and ring out the water so it leaves the material damp.
Take the coat hanger and clip the top of the pillowcase. Then lower the bottom part of the material slowly into the dyed water, as high as you want until you see the colour running. Keep in for a couple of minutes.
Hang so that the bottom part can sit soaking, a good place would be in your kitchen sink. Leave to soak for 20/30 mins.
Drain the excess water off and rinse in cold water, then hang to dry.
Iron on a high temperature.
I love how dip dying a simple white pillow case gives it a new life and is fun to do. There are so many different ways you can do the technique and I got carried away finding different things I could dye and even had a shot of tie dying. Have fun trying this technique out!

AMM was created as a way to share my aesthetics with the world. Stunning interiors instigated my passion for beautiful, extraordinary, and simple shapes. I was largely influenced by Nordic design philosophy and AMM transitioned from a personal blog into my own collection of interiors, things, visual trends, DIY projects, lifestyle products, and observations. As an interior design aficionado, I would love to see like-minded people, so stay tuned!

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general